As an Amazon Associate I earn from qualifying purchases
- 6%

MedeaWiz® DV-S1 Sprite® Looping HD Media Participant – Seamless Audio Video Auto Repeater 1080p 60Hz HDMI, NTSC and PAL Outputs – Set off Enter and Serial Management

$116.99

Added to wishlistRemoved from wishlist 0

MedeaWiz® DV-S1 Sprite® Looping HD Media Participant – Seamless Audio Video Auto Repeater 1080p 60Hz HDMI, NTSC and PAL Outputs – Set off Enter and Serial Management41X6KDqW1pL. AC41jHIN +UUL. AC41c0CksAhWL. AC51w5Ba yVVL. AC31NAk97UtcL. AC
Worth: $124.95 - $116.99
(as of May 31,2022 09:08:26 UTC – Particulars)

ISRHEWs

Product Description

Sprite by MedeaWiz
Sprite by MedeaWiz

DV-S1
DV-S1

Wiring Connections Rear Panel
Wiring Connections Rear Panel
Wiring Connections Rear Panel

Energy enter. Regulated 5 Volts DC solely. Middle constructive.
AV output. Composite video, stereo audio left and proper.
HDMI excessive definition video with audio .
Management Enter / Output. Push button / set off / serial enter and serial output.

MedeaWiz Sprite

Excessive Definition Video Participant

The MedeaWiz Sprite is a Excessive Definition digital video repeater able to HD 1080p HDMI output. It has a direct set off enter and a 2-way communications serial port. The Sprite will loop a video when energy is utilized, play a distinct video on a set off or serial command, after which return to the looping video. The Sprite has no black area when looping or altering information. It’s going to maintain the final body of video till the primary body shows.

Within the Set off Enter mode, you should use a pushbutton, different dry contact, or voltage stage change, together with your alternative of a Excessive or a Low transition set off.
Within the Serial Management Mode you’ll be able to have a looping video and management different movies to play on command.

Supported formats
Supported formats

Supported Codecs

Video

WMV (VC-1,WMV7, WMV8 max bitrate: 40Mbs)) // VOB (MPG2 max bitrate: 45Mbps) // PMP (Xvid, H.264 max bitrate:50Mbps) // RM/RMVB ( RV8/9 max bitrate:30Mbps) // MPG(Mpeg1,Mpeg2 max bitrate:45Mbps) // M2TS (Mpeg2 H.264 max bitrate:40Mbps) // FLV(H.263,H.264 max bitrate:50Mpbs) // AVI (Xvid, H.264 max bitrate:50Mbps) // TS/TP(Mpeg2,H.264,VC-1 max bitrate:40Mbps) // MP4/M4V (Xvid,H.264 max bitrate: 50Mbps) / MOV (Xvid, H.264 max bitrate: 50Mbps) // MKV (Mpeg2,RMVB,WMV9,Xvid,H.264 max bitrate: 50Mbps)

Image

JPG/JPEG // BMP // PNG // GIF

Audio

MP3 (all max bitrate:320kbps)
WMA (commonplace/professional max bitrate:384kbps)
OGG (Q1-Q10 500kbs)
FLAC (lever0-8 max bitrate:1.60mbps)
APE (max bitrate: 950kbps)
AAC (max bitrate 448kbps)
AC3 (AC3 solely 640kbps)
DTS (Dts solely 3.84Mbps)

The Sprite comes with:

Remote

Remote

A/V Cable

A/V Cable

I/O Plug

I/O Plug

AC Adapter

AC Adapter

IR Distant Management

We use a generic distant management that’s used for numerous fashions of video repeaters and DVD gamers. Not all buttons / features will reply, and a few are solely legitimate in sure modes. Most of our Prospects will solely use the distant for preliminary setup of the repeater. That is an IR management, and must be pointed immediately on the entrance of the Sprite. The Sprite might reply to another machine’s IR distant in undesirable methods.

AV cable, 3.5mm 4 pole to RCA

Use the Crimson RCA to ship instructions to the Sprite, the yellow RCA for the Sprite to report again to your management, and the white RCA for 5V energy from the Sprite. We advise you cowl the unused RCA plugs with electrical tape to keep away from shorting the ability provide and burning the interior fuse. In the event you get a cable elsewhere, verify to see that the wiring is similar. We now have seen some cables the place the purple, yellow and white RCA are wired to completely different poles on the three.5mm plug.

I/O plug, 3.5mm 4 pole to screw terminals

The screw terminal adaptor proven above on the appropriate is now included with the Sprite. The Sprite can provide 5 Volts DC on the I/O port in your micro-controller at as much as 100 mA.

AC adaptor, 100 to 240 Volt AC enter, 5 Volt DC output

The Sprite is among the most vitality environment friendly ‘inexperienced’ video repeaters obtainable. Utilizing solely 5 Volt DC energy at a median of 400 mA, it takes solely about 2 Watts to run. The Sprite requires a regulated 5 Volt DC energy provide, which is included. The facility connection takes a barrel plug with 1.35mm ID and three.5mm OD, heart Constructive.

✅ POWERFUL & ENERGY EFFICIENT: Helps as much as 1080p 60Hz video. Utilizing solely 5 Volt DC energy at a median of 400 mA, it takes solely about 2 Watts to run
✅ EASY TO USE: On-Display configuration menu. No programming required. Set off by push button, voltage change or serial command.
✅ MULTIFUNCTION: Can play most sorts of digital information from SD reminiscence card or USB drive. It helps greater than 30 common video, audio and picture codecs
✅ CONVENIENT TO USE: There is no such thing as a black area when looping or altering video information. Begins play when energy is utilized. No must push buttons each time
✅ RELIABLE DESIGN: Constructed to final with long-life capacitors, strong copper heat-sink and aluminum case. Small dimension and lightweight weight. Matches any area

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “MedeaWiz® DV-S1 Sprite® Looping HD Media Participant – Seamless Audio Video Auto Repeater 1080p 60Hz HDMI, NTSC and PAL Outputs – Set off Enter and Serial Management”

MedeaWiz® DV-S1 Sprite® Looping HD Media Participant – Seamless Audio Video Auto Repeater 1080p 60Hz HDMI, NTSC and PAL Outputs – Set off Enter and Serial Management
MedeaWiz® DV-S1 Sprite® Looping HD Media Participant – Seamless Audio Video Auto Repeater 1080p 60Hz HDMI, NTSC and PAL Outputs – Set off Enter and Serial Management

$116.99

Power Women's
Logo
Shopping cart